Mobile Broadband

Mobile Broadband configuration for Huawei E3276:

Windows

Dongle driver installation

Plug the dongle:
The PC will install the USB driver
Wait for it

An AutoPlay window will appear
Select Run AutoRun.exe:

In the Mobile Partner Setup window:
Select Next

In the License Agreement page
Select I Agree

In the Choose Install Location page:
Select the Location (Keep it as it is recommended)
Click next

In the Choose Start Menu Folder page:
Select Install

Wait for the installation to complete:
 

In the Completing the Mobile Partner Setup Wizard page:
Select Finish:

Wait a while, the software will run automatically. When it does:
Enter the SIM pin code
Click OK

In the Mobile Partner menu:
 Select Tools
Then click on Options

In the Options window:
 Select Network from the left box
 Then select Network Type tab
 Then in the Network Type tab select WCDMA preferred option

Continue in the options window:
 Select Profile Management from the left box
 Then in the Dial Up tab select new:

Now fill the Dial-Up page:
 Profile Name (Something meaningful): 3G
 APN:

• Static
• APN: Alfa

 Authentication:

• Access number: *99#
• User name:
•  Password:

Click Save

In Dial-Up page:
Select OK

Mobile Broadband configuration for Nokia Dongle:

WINDOWS- MAC
Dongle driver installation

Plug the dongle:
The PC will install the USB driver
Wait for it

Nokia Internet Modem Setup will start:
Select the language 
Click OK

Initialization will start:
Wait for it

In the Nokia Internet Modem Setup page:
Click Next

In the End-User License Agreement page:
Check the “I accept the terms in the License Agreement” box
Then Click Next

In the Choose Destination Location page:
Select the Location (Keep it as it is: Recommended)
Click Next

In the Ready To Install page:
Click Install

Installation will start:
Wait for it to finish

In the Completing the Nokia Internet Modem Setup Wizard page:
Click Finish

After the installation, wait for the program to start. When Nokia internet Modem start:
Enter the SIM Pin Code
Click OK

In the Nokia Internet Modem software:
Wait until the alfa 3G network is selected and the wireless connection exists, 
Click: Internet Connection

In the Internet Connection page:
Click on the green square
Wait till the Authentication is done

When the Authentication is over
You are connected to the internet!!

Mobile Broadband configuration for Novatel Dongle:

Windows

Mobile Broadband configuration for ZTE MF668:

Windows
MAC
LINUX

MobileBroadband configuration for Alcatel Dongle:

Windows

Mobile Broadband configuration for ZTE MF29:

Windows

Mobile Broadband configuration for ZTE MF30:

Windows

To configure the MF30, open a browser window and connect to the unit's IP address (http://192.168.0.1), the following window will be displayed:
In the top right hand corner of the window enter admin in the administrator.

Click Login to access the device settings:
The device's current status and configuration will be displayed, the router’s dashboard, to run through a brief wizard to configure the unit.

The Settings menu displays all available configuration options in details.
Click on 3G Settings menu and edit the Internet connection settings.

In the Network Select section you can choose the band selection mode either to be Automatic (2G and 3G), WCDMA Only (3G Only), or GSM Only (2GOnly).
In the APN Settings select the option for Manual APN then add and insert the following:

MBB Settings:
Profile Name: Alfa3G
APN: Alfa
DNS: Auto DNS
Authentication: PAP
User Name:
Password:

MI Settings:
Profile Name: Alfagprs
APN: alfa
DNS: Auto DNS
Authentication: PAP
User Name: mic1
Password:

After filling the settings press on Set default to set the APN Settings as default.

In the Settings, the advanced section allows you to change the default administrator password under the management section (Current Password, New Password, and Verify Password).

The PIN Manage enables or disables a PIN code on the SIM card (Current Password, New Password, and Verify Password).
Always in the Settings, select Wi-Fi Settings

Go to Security and select the Security Mode as WPA2 PSK or Shared and insert thepassword for the router connection.
Finally in the WAN Connection you can select the Wan Connection Mode either Always on to stay always connected or Manual to choose to connect or disconnect to the internet manually.

Mobile Broadband configuration for ZTE MF60:

MF30 / MF60 WINDOWS

• Insert the SIM Card
• The router comes with a default WPA2 Key. The key exist in a label under the battery.
• Plug in the Router
• Once the router has started, connect to it using the laptop and enter the password
• Open the Browser, and enter the Router IP 192.168.0.1 and click Enter
• Enter the Username: Admin, Password: admin
• Enter the Pin Code: 0000, and click Apply:
• In the Next Window, Click on Network Selection and Choose your preferred Network and Click Apply
• Click on APN Settings:

Choose Add 
IN Profile Name, Enter Alfa 3G
In APN Settings, choose Manual
In APN, Enter alfa
In PDP Type, Choose IP
In PDP Settings, Choose Auto PDP
In DNS, choose Auto DNS
In Authentication, choose PAP
Username: 
Password: 
Click Save
Click Set Default

Click on Quick Setup:
Click Next

In the Next screen, the profile name should be present:
Click Next

In the Next screen, the authentication should be read from the created APN
Click Next                                                                                                                                                                                                                   

Choose a name for the Wireless Network
Click Next

Choose the required encryption
Click Next

Verify the entered settings
Click Apply
The disconnected text available in the top right menu should become new Connected, and the internet connection should be available.

Mobile Broadband configuration for ZTE MF93D:

Windows

MobileBroadband configuration for Ipad:

Settings - Cellular Data APN settings - Cellular Data

APN : Alfa

Mobile Broadband configuration for Huawei E5577C :

• Insert USIM card
• Turn on the router
• Connect to the router using the wireless key: Written on the back of each router
• Open the browser and enter the following IP address: 192.168.8.1 Username: admin  Password: admin

APN Configuration 1st Method:

• Click on Setting⇾Dial up⇾Profile management⇾ New Profile:
• Profile name: Alfa
• Username:
• Password:
• APN: Alfa
• Save
• Select created Profile name “Alfa”
• Apply

APN Configuration 2ndMethod:

• Setting ⇾ Quick Setup ⇾ Configuration profile setting ⇾New profile
• Profile name: Alfa
• Username:
• Password:
• APN: Alfa
• Save ⇾ Next ⇾ Next ⇾ Finish

Mobile Broadband configuration for Samsung Tab 7.0:

Home -> wireless & networks 
Mobile Networks -> Access point name 
Press the menu key  
Create new and fill:  
Name: Mobile Broadband
APN: Alfa
Username: 
Password: 
Authentication type: PAP 
Select Mobile Broadband
Back
Select use packet data
Restart.

Mobile Broadband configuration for Samsung Tab 8.9:

Home -> wireless & networks 
Mobile Networks -> Access point name 
Press the menu key  
Create new and fill:  
Name: Mobile Broadband
APN: Alfa
Username: 
Password: 
Authentication type: PAP 
Select Mobile Broadband
Back
Select use packet data
Restart.

Mobile Broadband configuration for Huawei B315 4G:

Windows

• Insert USIM card
• Turn on the router
• Connect to the router using the wireless key: Written on the back of each router
• Open the browser and enter the following IP address: 192.168.8.1

APN Configuration 1st Method:

• Click on Setting⇾Quick Setup⇾New Profile then enterthe below info:
• Save
• Next⇾Next⇾Finish

APN Configuration 2ndMethod:

• Setting
• Dial Up
• Profile Management
• New Profile
• Save

Network Selection:

• Setting
• Dial up
• Network Setting
• Apply

Please follow the below instructions to set up your device for internet:

From any device open Wi-fi to connect to your router:

Open the browser and enter the following address: 192.168.0.1

Login by using password: admin

From Home Button click Disconnect in order to change APN.

To change APN:

Go to Settings > Network Settings > APN > Choose Manual > Add new:

Profile name: Alfa

If SIM is Mobile Broadband then enter IPV4 APN: alfa

without username & password.

If SIM is Mobile Internet then enter IPV4 APN: alfa without username & password.

Click Apply -> again select Manual > from Profile select profile that you have created: Alfa > Set as Default.

Then go to Home Button and Click Connect.

To Change Router name (SSID) / Password (Pass Phrase) and number of users (Max station Number):

Go to Settings-> Wi-Fi Settings ->Basic Settings

To Recharge / Subscribe / Check consumption MBB line open http://data.alfa.com.lb or www.alfa.com.lb.